ADPTE11 A-POOL SYSTEM 10-04/04-10 PH-CLJ PVDF-PTFE-VT 230V
ADPTE12 A-POOL SYSTEM 20-03/03-20 PH-CLJ PVDF-PTFE-VT 230V
A-Pool Top EVO PH-CLJ Pre-Assembled Panels (AQUA)
- A pre-assembled control panel for private pools of capacity up to 0-500 ppm with customized public pool solution available for the capacity of 2500ppm.
- Hydrogen peroxide and bromine variants are also available.
- It is used for the proportional regulation of pH and chlorine.
- The panel contains:
- N.2 AE START pH-CLJ
- N.2 HC151 mA
- Modular probe holder for pH and J probes
- pH electrode and A-J probe
- Buffer solutions
- Temperature probes and 2-level probes
- Pt-Cu probe for PPM chlorine reading
- Power supply 220-230V 50/60Hz
Categories: Dosage And Control Equipment, Swimming Pool
Return Inlet for Concrete Pool (ASTRAL)
- Made with ABS material.
- Can be used in any kind of pool.
- Comes with a multi-flow system meaning its diameter can be adjusted for the desired flow.
- It is used to bring treated water back to the pool and reduce the deposit of contaminants at the bottom of the pool.
- They bring the water level to the surface of the skimmer.
Skimmer 17.5L: Standard L-Mouth & Trim (ASTRAL)
- This is a 17.5L skimmer series from Astral.
- The entire skimmer is made with white ABS material and the exposed parts are UV-treated.
- Comes with a float gate and flap for flow regulation.
- Connections for lower suction:
- Internal: 1.5’’
- External: 2’’
- Simultaneous drain connection of int. 2’’.
- Top access water evacuation connection of Ø 32.
- Equipped with a leaf collecting basket.
- Circular cover that can be opened with tweezers and can be pivoted to flush the water perfectly.
- Hight can be adjusted to the required size.
- Manufacturers recommend the water flow of 7.5m3/h and to install a skimmer every 25m2 of the surface.
Shark Oval Pool Cleaner
- Shark oval pool cleaner is made with ABS polymer.
- Primed with a hose of 2 diameters (Ø 32-38).
- White polypropylene brush for cleaning.
- Can be fixed to a telescopic handle of a clip or wing nut system.
Safety Junction Box (ASTRAL)
Standard Glue Suction Nozzle (ASTRAL)
- Made with white ABS.
- Equipped with a 1.5'' thread.
- Recommended to be glued to Ø 63 and Ø 50 tubes.
- The maximum pressure is 6 bars.
- Wall Bushings reference: 15661 and 15660
Adjustable 2” Floor Inlet For Concrete Pool (ASTRAL)
- Made with white ABS and comes with S.S. screws.
- Adjustable suction/return inlet for concrete pools.
- The maximum recommended flow rate is 12m3/h
- Available in 4 colours.
Adjustable 3” Inlet for Concrete Pool (ASTRAL)
- Available in white ABS and Stainless Steel AISI-304
- The suction surface is 0.015m2, outer is Ø 295mm.
- The flow rate is 20m3/h with the maximum recommended flow according to EN 13451-1 being 26m3/h.
Suction Nozzle 2” Thread (ASTRAL)
- Made with white ABS.
- Equipped with a 1.5'' screw cap.
- The external thread is 2'' and the internal is Ø 50.
- The maximum pressure is 6 bars
- Wall Bushings reference: 15658 and 15659.
There are no reviews yet.