CODE DESCRIPTION
ADINS20PHRX AQUA DIN 20 START PH-RX CONTROLLER
ADINS20CL AQUA DIN 20 START CHLORINE (PT-CU) CONTROLLER
ADINS20CLJ AQUA DIN 20 START PPM A-J PROBES
ADIN20 START ”NEW” – Controllers and Analysers (AQUA)
- Rail-mounted digital controller DIN.
- User-friendly interface with backlighted LCD display and keypad.
- Password-protected setting menu.
- 2 adjustment modes: On/Off mode and Time-Pause mode.
- Proportional output 0/20mA.
- Level and Flow input sensors along with PT100 temperature probe.
- User menu selection, manual control of both relays, runtime monitoring of all outputs plus the control of the last probe.
- Self-calibrating measure probes.
Description
Related products
Return Inlet for Concrete Pool (ASTRAL)
- Made with ABS material.
- Can be used in any kind of pool.
- Comes with a multi-flow system meaning its diameter can be adjusted for the desired flow.
- It is used to bring treated water back to the pool and reduce the deposit of contaminants at the bottom of the pool.
- They bring the water level to the surface of the skimmer.
Multi-flow Discharge Nozzle (ASTRAL)
- This is a multi-flow discharge nozzle made with white ABS material.
- Comes in three diameters of 14mm,20mm, and 25mm, the desired one can be chosen when installed.
- According to EN-13451-1 standards, the maximum passage speed is 4m/s.
- Ø 14= 2.2 m3/h, Ø20 = 4.5 m3/h, Ø25 = 7 m3/h.
- Ø 63mm to glue outside and Ø 50mm to glue inside.
Skimmer 17.5L: Standard L-Mouth & Trim (ASTRAL)
- This is a 17.5L skimmer series from Astral.
- The entire skimmer is made with white ABS material and the exposed parts are UV-treated.
- Comes with a float gate and flap for flow regulation.
- Connections for lower suction:
- Internal: 1.5’’
- External: 2’’
- Simultaneous drain connection of int. 2’’.
- Top access water evacuation connection of Ø 32.
- Equipped with a leaf collecting basket.
- Circular cover that can be opened with tweezers and can be pivoted to flush the water perfectly.
- Hight can be adjusted to the required size.
- Manufacturers recommend the water flow of 7.5m3/h and to install a skimmer every 25m2 of the surface.
Reviews
There are no reviews yet.